MFR 012
Applies to: The electromechanical hygrostat is designed to control enclosure heaters so that the dew point is raised when a critical relative humidity of 65% is exceeded. In this way condensation and corrosion in enclosures with electric/electronic components is effectively prevented.
download> Adjustable relative humidity
> Change-over contact
> High switching capacity
> Easily accessible terminals
> Clip fixing
The electromechanical hygrostat is designed to control enclosure heaters so that the dew point is raised when a critical relative humidity of 65% is exceeded. In this way condensation and corrosion in enclosures with electric/electronic components is effectively prevented.
Mechanical Hygrostat MFR 012
| Art. No. | Setting range |
|---|---|
| 01220.0-00 | 35 to 95% RH |
| Switch difference1 | 4% RH (±3% tolerance) |
|---|---|
| Permissible air velocity | 15m/sec. |
| Contact type | change-over contact |
| Service life | > 50,000 cycles |
| Min. switching capacity | 20VAC/DC 100mA |
| Max. switching capacity | 250VAC, 5A DC 20W |
| Connection | 3-pole terminal for 2.5mm2, clamping torque 0.5Nm max.: rigid wire 2.5mm2 (AWG 14) stranded wire2 1.5mm2 (AWG 16) |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 67 x 50 x 38mm |
| Weight | approx. 60g |
| Fitting position | variable |
| Operating/Storage temperature | 0 to +60°C (+32 to +140°F) / -40 to +60°C (-40 to +140°F) |
| Operating/Storage humidity | max. 95% RH (non-condensing) |
| Protection type | IP20 |
| Approvals | UL File No. E164102, EAC |
1 at 50% RH
2 When connecting with stranded wires, wire end ferrules must be used.
